Loading..

Product was successfully added to your shopping cart.



My Cart (0)

Recently added item(s)

You have no items in your shopping cart.

NeuroTrac® MyoPlus2 Pro

Excl. Tax: €839.50 Incl. Tax: €999.00

Availability: In stock

plus shipping & handling
+ -

Quick Overview

Suitable for diagnosing, monitoring and treating a wide range of muscle problems


Dual Channel EMG + Stimulation + EMG triggered Stimulation unit

Details

The NeuroTrac MyoPlus 2 PRO incl. Software is a dual channel EMG Biofeedback & Stimulation High-End device which is powerful and easy to handle.
You can use it for EMG Biofeedback training, neuromuscular stimulation and EMG triggered stimulation!

  • New and Improved touch-screen with full colour display. The new user friendly interface makes it a self-explanatory unit with the interactive learning on the go, including electrode placement, running EMG graph as well as many other helpful tools.
  • Pre-set programmes for Incontinence treatment, Sports and muscular development, neuro-muscular Rehabilitation.
  • Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
  • 2 channel EMG (Biofeedback) combined with 2 channels of NMES (stimulation).
  • 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
  • Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
  • Multilingual LCD screen and voice prompts for Biofeedback.
  • Manual and Automatic threshold control.
  • EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
  • Stand alone device or used in conjunction with established multilingual software.
  • Now with Bluetooth connectivity! The unit sends up to 10 metres of  wireless data to PC software.
  • For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
  • Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.
  • 4 x AA batteries {No mains required}.

 

EMG (Biofeedback)

  • Dual channel EMG
  • EMG Range: 0.2 to 2000 μV RMS (continuous)
  • Sensitivity: 0.l μV RMS
  • Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
  • Selectable Bandpass filter - 3db Bandwidth,
    • a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% - Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% - Reading above 235 microvolts
    • b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
  • Notch filter: 50 Hz (Canada 60Hz) - 33 dbs (0. 1% accuracy)
  • Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
  • Work / Rest periods: 2-99 seconds
  • Number of Trials: 2-99

 

STIM (Neuromuscular Stimulation)

  • Dual channel Stimulator
  • Amplitude: 0-90 mA into 500 Ohm load - actual mA will tend to be less
    than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes
    in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms
    load the maximum will be limited to 50 mA.
  • Type: Constant current, maximum output
    voltage 70 Volts +5 / -10 Volts
  • Waveform: Symmetrical, rectangular,
    bi-phasic with net zero DC current
  • Pulse width selection: 50-450 μS (2% accuracy)
  • Pulse rate selection: 2-100 Hz (2% accuracy)
  • Work / Rest periods: 2-99 seconds
  • Time 1 - 99 minutes
  • Ramp up time: 0.1 - 9.9 seconds
  • Preset and user programmable treatment Programs
  • Automatic output shut off with detection of open electrode above 0.5 mA

Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.

Expected average battery set life [of standard 800 mAh, alkaline]:
a. MyoPlus2:    12-16 hours in STIM, 25 hours in EMG mode.
b. MyoPlus4:    8-16 hours in  STIM, 25 hours in EMG mode.

Environmental Conditions for use: +10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport: -10 to +50 degrees Centigrade. 0-90% Humidity.

Physical dimensions: Length 150 mm, Width 89 mm, Depth 35 mm.

Weight: MyoPlus2 device: 0.16 Kg (without batteries).

New!
eSense Universal App

The new eSense Universal App for the eSense Skin Response and eSense Temperature is available since August 2016. It offers many new features such as the procedures in an improved design.

esense app

Download it here:

Mindfield App Store mindfield Google Play Amazon App

 

Top