Pelvic floor stimulation device NeuroTrac Continence
The NeuroTrac Continence is a pelvic floor stimulation device, which is characterized by its very simple but effective application. The 2-channel incontinence stimulator provides 9 preset programs for the indications pain, urge incontinence, stress incontinence, mixed incontinence and can also be used for pelvic floor training and muscle building. 3 additional freely programmable programs can be individually adjusted to the user, if necessary. With this model, you can, for example, fight your incontinence, but counteract pain in the pelvic floor area. Buy the pelvic floor stimulation device from NeuroTrac now and start directly with pelvic floor training and promote health!
Advantages: NeuroTrac Continence pelvic floor stimulation device
The NeuroTrac Continence is a neuromuscular stimulator which is affordable and very easy to handle!
- Suitable for urinary or rectal incontinence
- Digital Dual Channel STIM unit
- 9 Built in programmes for ease of use
- 3 Customisable constant mode programmes
- Ability to lock the unit
- Records time in use and average current
- User friendly
- Compact, light and reliable
The NeuroTrac Continence works with EMS, here electrical impulses are used to stimulate the muscles. The electrodes are placed on the skin and can thus send targeted impulses to the muscles there. The electrodes can be placed where the muscles are weakest. This offers the advantage that electrostimulating pelvic floor training can be performed very precisely.
But not only the flexible use of the electrodes is advantageous, but also the attractive design and intuitive operation of this pelvic floor stimulation device. The large display is well illuminated and all programs can be set very easily. The strength of the electrostimulation can be changed at any time and the training time is also displayed. The three free programs can be individually configured to suit the user and their needs, making pelvic floor training particularly effective.
Buy NeuroTrac Continence pelvic floor stimulation device now and create your own training program!
Protocols & Physical Dimensions
Stimulation protocols
- Dual channel: individually isolated circuits.
- Amplitude: 0 – 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
- Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
- Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
- Selectable pulse width: 50 μS – 450 μS [2% accuracy].
- Pulse Rate selection: in the continuous mode 2 Hz – 100 Hz [2% accuracy].
- Time duration of the treatment selectable: 1 minute to 90 minutes.
- Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
- Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
- Ramp up time 0.3 – 9.9 seconds.
- If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
Physical dimensions: 119.2 x 69 x 28.7 mm
Weight: 0.07KG without battery, 0.1KG with battery.
Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.
Environmental conditions for storage & transport:
10 to +50 degrees Centigrade. 0-90% Humidity.
Optional (not included in delivery, please order – under electrodes):
Vaginal probe, rectal probe, electrode gel
Reviews
There are no reviews yet.